Phone: 1300 071 250             Email: sales@buildingsuppliesaustralia.com.au

What Does AAC Mean for Australian Builds?

Autoclaved aerated concrete, or AAC, is turning up on more Australian building sites. With James Hardie now offering AAC alongside its fibre cement range, it’s worth knowing what the material is and where it fits. 

What is AAC (autoclaved aerated concrete)?

AAC is a lightweight concrete made from cement, lime, sand and water, with an agent that fills it with millions of tiny air pockets. It’s cured in a high-pressure steam chamber called an autoclave, which gives the “autoclaved” part of the name. Wall and floor panels are also reinforced with steel mesh.

AAC - autoclaved aerated concrete

The air pockets make AAC much lighter than standard concrete. They also give it useful insulating and fire-resistant properties. Because it’s softer and more workable than dense concrete, it can be cut and shaped on site with common tools.

Is AAC the same as normal concrete?

No. AAC has the same basic ingredients as normal concrete, but it’s far lighter, easier to handle and cut, and a better insulator. Standard concrete is dense and heavy, and it usually needs formwork, curing time and a lot of labour.

AAC arrives as ready-made panels or blocks. Builders can position and fix them quickly rather than pouring and waiting.

Why are builders choosing AAC?

Builders are choosing AAC mainly for speed, reduced labour and solid all-round performance. The main benefits are:

  • Faster builds: Large panels cover more area per lift than individual bricks.
  • Fewer skilled trades needed: Panel installation doesn’t depend on a bricklaying gang, which matters as experienced bricklayers become harder to find.
  • Fire resistance: AAC doesn’t burn, which helps with fire-rated walls.
  • Thermal performance: The air-filled structure helps slow heat movement through the wall.
  • Easy workability: It cuts, chases and fixes without specialist equipment.

Why is James Hardie expanding into AAC?

James Hardie is expanding into AAC to give builders both AAC and fibre cement from one trusted brand. The company introduced its Hardie™ Gravis™ Panel in 2026, responding to demand for faster, lighter construction and for mixed-material home designs that combine, say, a rendered ground floor with fibre cement cladding above.

AAC itself isn’t new to Australia. CSR’s Hebel business has been producing it locally for around 30 years. What’s new is James Hardie, the country’s best-known cladding brand, bringing AAC into its range. That signals the material is moving further into mainstream residential building.

What is the Hardie Gravis™ Panel?

hardie-gravis-panel-wall

The Hardie Gravis™ Panel is James Hardie’s steel-reinforced AAC panel system for walls and floors. The mesh inside the panel is corrosion-protected for long-term durability. Panels are 600mm wide and offered in different lengths, with a smooth surface ready for render.

The range includes:

James Hardie also reports that this is the first AAC product with CodeMark certification to both NCC 2022 and NCC 2025, which can simplify specification across Australia.

Is AAC suitable for Australian homes?

Yes. AAC panels are made to Australian Standard AS 5146, and the Gravis range carries CodeMark certification. AAC suits Australian conditions well because it resists fire and has good insulating properties, which helps with energy ratings.

James Hardie publishes total wall R-values for its systems ranging from about 2.2 to 3.6, depending on the panel, framing and insulation used. Because AAC changes the wall build-up, your energy assessment needs to be run for that specific system.

What should builders know before switching to AAC?

Plan the whole wall system rather than swapping in a single material. An AAC wall typically still needs framing, an engineer’s bracing design, wrap and insulation, a panel installer and a render crew. This differs from a brick wall, so check with your engineer and certifier early.

A few practical tips:

  • Follow the installation guide: Use the manufacturer’s current guide for fixings, joints and details.
  • Protect panels on site: Store them dry and handle them carefully to avoid chipped edges. Small chips can be repaired with a patch compound.
  • Talk to your certifier: Confirm approvals and energy requirements for your state.
  • Order the right lengths: Panels come in set lengths, so accurate takeoffs reduce waste.

The bottom line

AAC offers Australian builders a lighter, faster alternative to traditional masonry. With James Hardie bringing AAC into its range alongside fibre cement, expect to see it specified more often. For everyday builders, it’s worth getting familiar with how it works.

Ready to build with AAC?

Building Supplies Australia Network stocks James Hardie materials, including Hardie Gravis™ panels. We deliver across Australia and offer pick-up options in the Brisbane and Melbourne areas. Order online or request a quote today, and let our team help you get the right materials on site.

Shopping Cart